Netvio 1Gb PoE 4K60 4:4:4 HDR Dante AV-A Multi Stream Encoder With ContentPlus+, ARC or eARC, IR, RS-232 and CEC Control

The IP-JP4-60-D-TX-10 is Netvio's next-generation 4K60 AVoIP encoder, bringing Audinate's Dante AV-A as a standard feature to the proven JP4-60 platform. Delivering visually lossless 4K60 4:4:4 HDR video at 18Gbps over standard 1Gb networks with ultra-low latency and pixel-for-pixel performance, the JP4-60-D Series unifies broadcast-grade audio and video transport on a single, network-friendly platform — ideal for venues, events, corporate workspaces, learning environments and luxury residential installations

The encoder accepts a single HDMI 2.0b input at up to 4K60 4:4:4 with HDCP 2.2 support and HDCP 2.3 compatibility, alongside an HDMI loop output for local monitoring and confidence feeds. Analogue stereo and coaxial digital audio outputs sit alongside a 3.5 mm analogue audio input, allowing a supplementary audio source to be embedded into the HDMI signal where required. ARC and eARC capture and routing is supported, and IR, RS-232 via Phoenix connector and the integrated TCP/IP API provide full control system integration.

ContentPlus+ dual-stream encoding remains a defining capability, delivering simultaneous JPEG2000 and H.265 RTSP streams. A primary 1920 x 1080 30fps stream with LPCM 2.0 audio and a 960 x 580 30fps sub stream extend distribution beyond fixed display points — to digital signage platforms, live streaming software, VLC clients, embedded control panel interfaces and the NetvioGo AV control application on Apple and Android devices — without compromising the headline 4K60 4:4:4 output.

The most significant change with the JP4-60-D Series is consolidation: the previous IP-JP4-60 and IP-JP4-60-DNT ranges have been merged into a single, simplified platform. Two channels of Dante audio are now included as standard on every encoder, fully interoperable with any Dante-enabled device and natively compatible with Dante Controller, Dante Director and Dante Domain Manager. This allows the encoder to operate within the Netvio AVoIP ecosystem or as part of a standalone Audinate Dante environment, removing previous product segmentation while retaining uncompromised image quality.

Housed in a slimline black metal enclosure measuring 204 x 100 x 21.5 mm, the encoder is powered via PoE (IEEE 802.3af) or an optional 12V DC supply (PSU not supplied). It integrates seamlessly with the IP-JP4-CL-10 controller (not required when operating in AV-A mode), the IP-SW Series Plug & Network switches, the TS-10-10 touch panel and the wider Netvio ecosystem including Netvio360, AppBuilder and NetvioGo. Drivers are available for Crestron, Q-Sys, Control4, RTI and Elan, and the unit is supported by a five-year product warranty with two-year advanced replacement.