WyreStorm NetworkHD 500 Series 4K60 4:4:4 JPEG2000 Encoder With Dante Audio

The NHD-500-DNT-TX from WyreStorm is part of the powerful NetworkHD 500 series. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. 

This encoder has a number of advanced features such as the flexibility of Ethernet or fibre as a transport method.

Ultra low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante® and AES67 audio output. 

The integrated 2 channel Dante® and AES67 output allows audio to be sent over the network to compatible Dante® and AES67 enabled DSPs, amplifiers, mixers and more. Audio can be transmitted via Dante® from either the encoder’s HDMI input or a separate analog input. Dante® audio and NetworkHD A/V can be integrated into the same network or separated via a dedicated Dante only port.  If 3rd party Dante equipment exists on a dedicated network, simply connect the Dante only port to keep things separate and avoid complicated network configurations. 

Capable of encoding full HDMI 2.0 content, including 4K60 4:4:4 8bit and high dynamic range video including Dolby Vision, HDR10 and HLG up to 12bit 4:2:2 at 60Hz over a 1GbE network. Equipped with both Ethernet and fibre outputs, the NHD-500-DNT-TX offers flexibility for any installation.

Ethernet can support transmissions up to 100m (328ft) and fibre is capable of a stunning 550m / 1800ft using OM3 MMF.