WyreStorm HDMI In line Signal Re-Clocker with EDID Management, Audio De-Embed
Details
Being a multi purpose tool, the CON-H2-EDID In Line Signal Re Clocker from WyreStorm can perform a variety of tasks within any installation. As an in line device, it can act as an EDID manager to request specific content from a source or as an audio de-embedder extracting HDMI source audio via the S/PDIF or stereo mini jack ports. This Re Clocker also features a micro zone controller, sending CEC and RS-232 power triggers to connected projectors or screens.
In an installation situation where EDID is not being communicated properly, the CON-H2-EDID from WyreStorm can be connected in line after the source device and using either a built in or uploaded EDID file can ensure the correct content is requested from the source.
This Re Clocker is compatible with any current content due its 18Gbps and HDCP2.2 support. Therefore, it can be placed in line after any source device and extract the incoming audio via the 3.5mm jack or coaxial. Working on signal presence logic, the CON-H2-EDID can trigger a connected screen or projector on/off via both CEC or RS-232; the RS-232 commands can be entered via the configuration s/w tool that is part of WMS v1.6.
At the same time, the WyreStorm Re Clocker can trigger 3rd party motors i.e. projector screens, lifts, blinds and curtains via the built in relays.
Sporting an 18Gbps HDMI input, the CON-H2-EDID can support all UHD video signals up to and including 2160p 4:4:4/60 and high frame rate HDR 12bit 4:2:2 up to 60Hz.
The WyreStorm CON-H2-EDID is a multi purpose tool which effectively and efficient performs a variety of tasks for any installation.
In an installation situation where EDID is not being communicated properly, the CON-H2-EDID from WyreStorm can be connected in line after the source device and using either a built in or uploaded EDID file can ensure the correct content is requested from the source.
This Re Clocker is compatible with any current content due its 18Gbps and HDCP2.2 support. Therefore, it can be placed in line after any source device and extract the incoming audio via the 3.5mm jack or coaxial. Working on signal presence logic, the CON-H2-EDID can trigger a connected screen or projector on/off via both CEC or RS-232; the RS-232 commands can be entered via the configuration s/w tool that is part of WMS v1.6.
At the same time, the WyreStorm Re Clocker can trigger 3rd party motors i.e. projector screens, lifts, blinds and curtains via the built in relays.
Sporting an 18Gbps HDMI input, the CON-H2-EDID can support all UHD video signals up to and including 2160p 4:4:4/60 and high frame rate HDR 12bit 4:2:2 up to 60Hz.
The WyreStorm CON-H2-EDID is a multi purpose tool which effectively and efficient performs a variety of tasks for any installation.
Features
[object Object]
Specifications
[object Object]