Sennheiser EW/DX Multi Channel Wireless Receivers
 Mhz*2 Channel Dante*01.jpg?resizeid=4&resizeh=600&resizew=600)
 Mhz*2 Channel Dante*02.jpg?resizeid=4&resizeh=600&resizew=600)
 Mhz*2 Channel*01.jpg?resizeid=4&resizeh=600&resizew=600)
 Mhz*4 Channel Dante*01.jpg?resizeid=4&resizeh=600&resizew=600)
 Mhz*4 Channel Dante*02.jpg?resizeid=4&resizeh=600&resizew=600)
Details
Sennheiser's multi channel receivers for the Evolution Wireless Digital handheld, bodypack and table stand transmitters, extended the 88MHz switching bandwidth and has an intermodulation free operation for up to 293 channels with secure AES-256 encryption and redundant power supply via Power over Ethernet (PoE).
The Sennheiser EW-DX simplifies your professional workflow by utilising refined technologies to deliver a digital UHF system that can be scaled with ease. With Sennheiser's EW-DX's advanced feature set and hardware options, classrooms, corporate campuses and live performance productions benefit from a network ready system that is designed to integrate seamlessly. AutoScan quickly assesses your environment and uses equidistant channel spacing to deploy frequencies while tools like Sennheiser’s Control Cockpit, Wireless Systems Manager and Smart Assist App allow you to monitor your system remotely.
These receivers offer low latency of 1.9ms wireless transmission due to Sennheiser Performance Audio Codec (SePAC) and with standard mode, 600kHz spacing for up to 146 channels. Whereas, Link Density (LD) mode provides 300 kHz spacing for up to 293 channels. It delivers a clear and easy focused user interface with OLED display, jog wheel navigation and control buttons.
Selective headphone output with volume control on front panel is included, as well as, extended menu settings such as custom frequency list, selectable sync parameter and walk test.
Sennheiser's EW-DX-EM-2: a two channel half rack unit.
Please Note: The Dante™ versions below will be available later in the year. Please see the specification for further details.
Sennheiser EW-DX-EM-2-Dante, a two channel half rack unit with Dante™
Sennheiser EW-DX-EM-4 Dante four channel full rack unit with Dante™
The Dante™ units will have various flexible network modes: single cable (Control, Dante®, PoE), split mode (Control + PoE and Dante® daisy chain) or redundancy mode (Control + PoE, Dante® Prim, Dante® Sec) to create the correct topology depending on your system's needs.
The Sennheiser EW-DX simplifies your professional workflow by utilising refined technologies to deliver a digital UHF system that can be scaled with ease. With Sennheiser's EW-DX's advanced feature set and hardware options, classrooms, corporate campuses and live performance productions benefit from a network ready system that is designed to integrate seamlessly. AutoScan quickly assesses your environment and uses equidistant channel spacing to deploy frequencies while tools like Sennheiser’s Control Cockpit, Wireless Systems Manager and Smart Assist App allow you to monitor your system remotely.
These receivers offer low latency of 1.9ms wireless transmission due to Sennheiser Performance Audio Codec (SePAC) and with standard mode, 600kHz spacing for up to 146 channels. Whereas, Link Density (LD) mode provides 300 kHz spacing for up to 293 channels. It delivers a clear and easy focused user interface with OLED display, jog wheel navigation and control buttons.
Selective headphone output with volume control on front panel is included, as well as, extended menu settings such as custom frequency list, selectable sync parameter and walk test.
Sennheiser's EW-DX-EM-2: a two channel half rack unit.
Please Note: The Dante™ versions below will be available later in the year. Please see the specification for further details.
Sennheiser EW-DX-EM-2-Dante, a two channel half rack unit with Dante™
Sennheiser EW-DX-EM-4 Dante four channel full rack unit with Dante™
The Dante™ units will have various flexible network modes: single cable (Control, Dante®, PoE), split mode (Control + PoE and Dante® daisy chain) or redundancy mode (Control + PoE, Dante® Prim, Dante® Sec) to create the correct topology depending on your system's needs.
Features
[object Object]
Specifications
[object Object]