 
|
RFX-250 RF Sensor (antenna module)
The RFX-250 receives radio signals from a remote
control and relays them via cable back to the
MSC-400 master System Controller or MRF-350 Base
Station. Advanced Narrow Band receiving circuitry
provides longer range and minimizes interference,
providing for more reliable system operation. Its
compact size enables the RFX-250 to be placed out of
sight.
The RFX-250 displays RF interference via a bright
red LED which flickers when interference is present.
Simply relocate the RFX-250 out of the interference
area. The RFX-250 is separately mounted in the
interference-free location and connected to the
MSC-400 or MRF-350 base station by a three conductor
cable up to 150 feet away.
By combining additional RFX-250 antenna modules in
parallel using a three conductor wire connected to a
centrally located base station, custom installers
can extend "no more pointing" RF automation to all
areas and rooms of even the largest estates.
One RFX-250 Narrow Band RF Sensor is included with
the MSC-400 Master System Controller and with the
MRF-350 Multi-Zone RF Base Station. Additional units
can be purchased separately.
Note: The RFX-250 uses
Narrow Band RF and is perfectly tuned and matched to
operate with the MX-3000, MX-980, TX-1000, MX-950,
MX-810 and MX-900 remote controls. It is not
compatible with any other remotes. |
 |
|
