Stealth Model B1630 Flat Panel Subwoofer
The
Stealth Acoustics B1630 in-wall subwoofer panel is a unique
solution for putting subwoofer powered low end into a living
space invisibly. The B1630 is a panel 16" by 30" that mounts
directly to the structural framing of the wall replacing the
drywall. The panel has an active area that moves and is
surrounded by a solid mounting frame. The subwoofer panel is
secured to the mounting frame, and the drywall is bonded to
the panel to create a seamless transition. Similar in
construction to the Stealth 228 Series 2 full range system,
the B1630 has a surface on the face of the panel that is
designed to be painted with latex based products. Light
texture or wallpaper can also be applied.
Front view of the model B1630
In-Wall Speaker. |
Rear view of the model B1630
In-Wall Speaker. |
The
B1630 uses (2) 8" woofers mounted on a baffle built from 1"
thick MDF. This acts as the backbone of the system. The
baffle is bonded to one side of the mounting frame with the
active panel mounted to the opposite side. This creates an
air tight chamber. The woofers fire into this chamber
activating the entire face of the panel with the exception
of the 1-3/4" mounting border. The mounting area is
identified by a dashed line printed on the face of the
panel. The active panel is constructed of a three layer
combination of materials consisting of two layers of a high
quality paper separated by a layer of Styrofoam. This
creates a panel that is very light weight yet rigid enough
to maintain the integrity of the wall. When used in
conjunction with 5/8" drywall, the B1630 can be installed in
framing openings as narrow as 9-1/2" between studs or
ceiling joists. Minimum depth is 3-1/2".
Since it installs like a piece of wall board, finishing is
left to the professional drywall tradesman. The A/V
integrator need not pick up a trowel. The basic installation
notes are printed on the face of every panel and a step by
step photo installation guide is shipped with every pair of
speakers.
Specifications:
Nominal Impedance: 16 ohm
Frequency Response: 35hz to 200hz, -4db
(Installation parameters will affect frequency
response)
Low Frequency Driver: (2) 8” woofer with
rubber surround, 1.5" voice coil, 20 oz. magnet
Sensitivity: 87db
Dimensions: 15-7/8” x 30”
Depth: 3-1/4” (with 5/8" drywall)
Downloads:
Download Colour Brochure (PDF)
Download Specifications Sheet (PDF)
Adobe Acrobat Reader
is required to open this file. If you do not
have this software installed, you can get it here:
