Home | Contact Us | About Us | FAQs | Privacy Policy | Site Terms | Trade Accounts | Training

Stealth BX Backboxes

We recommend using this backbox on installations where the space behind the drywall is open. This typically occurs on ceiling installations where the space above is attic, or above gas fireplaces where the the wall has been built out to receive the fireplace. This product is also useful on installations where sound transfer from one floor to the next is of concern.

Sturdy Construction

This backbox is built from high-quality birch MDF and shipped disassembled. Assembly is simple and should take only 5 to 10 minutes with the aid of a power screwdriver. The parts are predrilled and the screws are included. A terminal cup with speaker wire pigtails allow the backbox to be completely assembled and attached to the speaker before the speaker is installed. A piece of fiberglass insulation for the interior of the box is also included.

Installation Note:

Use Stealth PlaceSavers to secure the location of the speakers at the rough-in stage of installation.

The Stealth backboxes should go in with the speakers after the drywall has been hung, but before the taping begins.

Dimensions:

F6BX: 14" long, 9-3/4" wide, 8-3/8" deep

F8BX: 21-7/8" long, 10-15/16" wide, 8-3/8" deep

1630BX: 29-7/8" long, 10-15/16" wide, 8-3/8" deep

Note: BX backboxes will NOT fit into a standard 2"x4" wall

Downloads:

Download BX Information Sheet (PDF)

Adobe Acrobat Reader is required to open this file.  If you do not have this software installed, you can get it here: