1. Home
  2. Networking
  3. Racking
  4. Mid Atlantic Wall Rack Pivoting Sectional Cabinet Black
Alternative Image

Mid Atlantic Wall Rack Pivoting Sectional Cabinet Black

Code: MAP-DWR-10U-17
Print Page
  1. Mid Atlantic - U Values
  2. Mid Atlantic - Depth
  • Robust welded steel construction, with Seismic certification
  • Patented Tool Free Quick-Mount™ system for center section mounting
  • Center section swing is reversible, and can be both keylocked and padlocked
  • Center section is keyed differently from optional front door for security
  • Designed for choice of active or passive cooling
  • Standard front adjustable 10-32 threaded rackrail
     

For more information and live pricing, please login to your account or call us on 01256 638500.

  • Overview
  • Features
  • Technical Specification
  • Downloads
  • Accessories

Specify a DWR wall cabinet to provide easy rear access while keeping floor areas clear. This pivoting, sectional wall cabinet is ideal for systems in both secured and non-secured areas. Most versatile wall rack available!

  • Robust welded steel construction, with Seismic certification
  • Patented Tool Free Quick-Mount™ system for center section mounting
  • Center section swing is reversible, and can be both keylocked and padlocked
  • Center section is keyed differently from optional front door for security
  • Designed for choice of active or passive cooling
  • Standard front adjustable 10-32 threaded rackrail

General Info
Finish: Textured Black Powder Coat
UL Standards Tested: UL2416

Listing Agencies/Third Party Certifications
ASCE: 7-10
RoHS: Yes
Greenguard: Yes
CSA Standard: Yes
UL Listing No: E313734

Dimensions
Usable Depth: 15
Usable Height: 17.5
Capacity Weight (US): 200
Depth (US): 17.3
Height (US): 24.563
Width (US): 23.4
Rack Units: 10

Technical Information
Rackrail Type: 10-32
Seismic Load Capacity: 155
Static Load Capacity: 800
UL Load Capacity: 200
Material: Steel
Mounting: Horizontal
Seismic Rating: 163

Eco-Benefit Information
RoHS Compliant


EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-10-17. Overall dimensions shall be 23.4" W x 24-1/2" H x 17.3" D. Weight capacity shall be 200 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 15” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack.

To download please use the links below or right click link and select “Save target as”

Data Sheet (PDF)