1. Home
  2. Networking
  3. Power Management
  4. AMX NetLinx ZigBee Pro RF repeater
AMX NetLinx ZigBee Pro RF repeater Alternative Image

AMX NetLinx ZigBee Pro RF repeater

Code: AMX-FG5791-03
Print Page

The NetLinx ZigBee Pro Repeater can be added throughout the installation to ensure a comprehensive, broad wireless coverage area with no "dead spots," or where extra coverage is needed.

For more information and live pricing, please login to your account or call us on 01256 638500.

AMX
  • Overview
  • Features
  • Technical Specification
  • Downloads

OVERVIEW

The NetLinx ZigBee Pro Repeater can be added throughout the installation to ensure a comprehensive, broad wireless coverage area with no "dead spots," or where extra coverage is needed.

COMMON APPLICATION

Ideal for increasing the wireless coverage area of ZigBee devices throughout residences or commercial buildings.

 

FEATURES

  • Can coexist with 802.11 wireless networks without signal interference
  • Supports 16 wireless channels for interference tolerance
  • Provides redundant paths of communication
  • Configurable to include or exclude a ZigBee device on the ZigBee network

DIMENSIONS (HWD)

1" x 2 1/2" x 3 1/2" (2.3 cm x 6.4 cm x 8.7 cm)

Note: depth does not include antenna

WEIGHT

4 oz (113.39 g)

POWER

10.5 - 18 VDC; (13.5 VDC nominal operation voltage)

MEMORY

  • 16 MB of FLASH
  • 1 MB external memory

 RADIO SPECIFICATIONS

  • Frequency: 2.4 GHz
  • Operating Channels: 11 – 26
  • Modulation Technique: DSS
  • Output Power: Region/country specific
  • Coverage Area: 165 feet (50.2 m)

FIRMWARE/SOFTWARE SPECIFICATIONS

  • IP Configuration: Static IP or DHCP client (default is static, 192.168.1.140)
  • Communications: ZigBee, TCP/IP, The NXR-ZRP communicates with a NetLinx master via a NXR-ZGW.

FRONT COMPONENTS

  • LEDs
    • PWR/STATUS: Power ON is indicated with a solid light. Power OFF is indicated with no light.
    • RF: The LED is solid when end devices are connected; end devices not connected is indicated with no LED light; the LED blinks to indicate activity.
    • ICSP: The LED is solid when ICSP connection is in place with the NetLinx master.
  • Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna.
  • ID Button: Press and hold for approximately 10 seconds to return the NXR-ZRP to factory default settings.

REAR COMPONENTS

  • Power connector : 2-pin 3.5mm captive-wire connector

ENVIRONMENTAL

  • Operating Temperature: -30ºC (-22ºF) to 70ºC (158ºF)
  • Relative Humidity: 5% to 85% non-condensing; intended for indoor use only)